Name: CRKT Jumbones 7532 pocket knife, Jeff Park design
Brand: CRKT
SKU: CK-7532
Price: 3345 SEK
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knivesandtools EDC pouch

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Work Sharp Multi-Sharpener Ken Onion Edition

Spyderco Sharpmaker, 204MF

CRKT Williams Defense Pen, Black Aluminum, tactical pen, James Williams design

legal_agecheck_key

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

CRKT tactical pen designed by James Williams, black

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

CRKT Williams Defense Pen, OD Green, tactical pen James Williams design

CRKT Veff Sharp Sharpener VEFF1 diamant 600 grit, sharpening steel set

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

CRKT Nathan’s Knife Kit 1032 DIT kit wooden pocket knife

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools 550 paracord type III, colour: charcoal grey, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Ballistol maintenance oil, 50 ml

Handle/blade: aluminium/AUS8
Blade length: 12.5 cm
Weight: 163 grams

The **CRKT Jumbones 7532** is a stylish pocket knife, designed by Jeff Park, employee of Ken Onion. The Jumbones is a larger version of the popular CRKT Crossbones. A lot larger version. With a total length of 27.9 cm the Jumbones is 7.5 cm larger than the Crossbones! This might not make the Jumbones the perfect knife for EDC, but it is still very cool.

 You easily open the Crossbones with one hand with the flipper. The position and round finish of the flipper-tab is nice and subtle. It hardly stands out. If you hand the Jumbones to someone who knows nothing of knives it might not even be obvious that this is a pocket knife. When opened the linerlock will keep the blade in place. The aluminium handle is enhanced with a beautiful pattern. On the decorated pivot you will spot two crossed bones. It is how the smaller version of the Jumbones, the Crossbones, got its name.



CRKT Jumbones 7532 pocket knife, Jeff Park design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT Jumbones 7532 pocket knife, Jeff Park design

CRKT Jumbones 7532 pocket knife, Jeff Park design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Jumbones 7532 pocket knife, Jeff Park design

CRKT Jumbones 7532 pocket knife, Jeff Park design

CRKT Jumbones 7532 pocket knife, Jeff Park design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Jumbones 7532 pocket knife, Jeff Park design

Related topics