Name: HORL 2 Cruise knife sharpener, HO2C-SET
Brand: HORL
SKU: XX-39349
Price: 1156.96 SEK
Availability: InStock

- Minor scratches and/or dents.
- Slight traces of use.

HORL 2 Cruise knife sharpener, HO2C-SET

product_reference

not_replaced_in

brand

colour

material

grit_general

stone_abrasive

sharpening_angle

notforsale

value_height

value_length

value_weight

value_diameter

expectedRestockDate

grit_size_kato

videos

series

sharp_sys_angle

The sharpening angle(s) at which the system can sharpen your knives (per side). For multiple sharpening angles we list the minimum and the maximum sharpening angle. All sharpening angles in between are included. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

The material that gives the sharpening stone its abrasive effect. Diamond, ceramics (e.g. aluminium oxide or silicon carbide) or the materials in a natural stone. Read [more about the advantages and disadvantages of these materials](/en/ct/sharpening-stone-materials-which-are-the-best.htm).

Abrasive

Material

elec_sharp_comp

fixed_sharpening_angle

* No: the device has a variable adjustable sharpening angle.  
* Yes: the device has one fixed, non-adjustable sharpening angle.

Fixed sharpening angle

The grain size a supplier gives to its sharpening stones. Please note: This can be either in FEPA-F (European), ANSI (American) or JIS (Japanese). Read [more about the different grain sizes here](/en/ct/expressing-grain-sizes-sharpening-stones.htm).

Grit according to supplier

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

stone_water

Some sharpening stones need to be submerged, others only need a splash of water and some need no water at all! For the best results, check in advance what is best for your sharpening stone.

Use with water

The grain size we give to a sharpening stone. We test all sharpening stones ourselves and add an appropriate grain size on the basis of this test. From extra coarse to ultra fine.

HORL 2 Cruise knife sharpener, HO2C-SET