Name: Kizer T111 Crocotool, Evgeny Polukhin design
Brand: Kizer
SKU: KZT111
Price: 591 SEK
Availability: OutOfStock

Work Sharp Multi-Sharpener Ken Onion Edition

notforsale

not_replaced_in

Knivesandtools EDC pouch

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

Blade-Tech Tek-Lok (large) universal belt loop mounting system

UltiClip XL clip for sheaths

UltiClip UltiLink Complete Kit, mounting set for sheaths

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

UltiClip Slim 2.2 clip for sheaths

Fallkniven Diamond Ceramic Whetstone DC4

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Ballistol maintenance oil spray, 200 ml

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Hultafors Flint FS fire steel, 380280

Knivesandtools #OneKnifeStand, knife stand

Handle/blade: CPM S35VN
Blade length: 5.0 cm
Weight: 25 grams


The **Kizer Crocotool T111** is a practical and ompact fixed neck knife, with a couple practical tools. In addition to a modest blade made from CPM S35VN steel the spine has been enhanced with a bottle opener. Because of its clever design you can also use it as a can opener. The handle is enhanced with a wrench. The smallest cut out of the wrench can be used as a bit holder for standard 6 mm bits. The base of the handle is enhanced with a small slot to make sure you can strip wires and the end of the handle can be used as a flat screwdriver or pry-bar.

The Crocotool comes with a compact kydex sheath. With the included piece of paracord you can turn it into a neck knife, and because of the clever cut-out in the kydex you can also use the bottle opener when the knife is in the sheath.

Kizer T111 Crocotool, Evgeny Polukhin design

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

when spending at least 850 kr on Kizer knives (1 per order)

Free Kizer Christmas Patch

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Kizer T111 Crocotool, Evgeny Polukhin design

Free Kizer Christmas Patch

Kizer T111 Crocotool, Evgeny Polukhin design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Kizer T111 Crocotool, Evgeny Polukhin design

Kizer T111 Crocotool, Evgeny Polukhin design

Free Kizer Christmas Patch

Kizer T111 Crocotool, Evgeny Polukhin design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Kizer T111 Crocotool, Evgeny Polukhin design

Related topics